strippers&dykes
Member
- Location
- Mes,AZ
Have a square D 30amp single pole shunt breaker, wonder were the controll wire from the ansul system goes on the breaker. On the shunt side there are two screws, is one fore control and one for the equipment neutral? And how do I now if if its N.O or N.C?
Here is what is says on the breaker; "shunt trip circuit is ope when circuit breaker is off or tripped" thanks in advance!
Here is what is says on the breaker; "shunt trip circuit is ope when circuit breaker is off or tripped" thanks in advance!