Sizing a junction box

[ctaylo360860]

Apologies. I meant anywhere on the outside of the house, not necessarily back-to-back with the panel.

Only having the main disco inside triggers the nearest-point-of-entrance (of conductors) requirement.


Yes, outside or immediately inside. This is what I meant that can double as the wiring-method interface.

Remember to maintain neutral isolation from grounding and electrodes (yes, electrodes are required).

Service dis will be bonded and everything else will be isolated… I need g rod at the house because separate structure…

The picture should show what I’m trying to accomplish….

 

[LarryFine]

In my opinion, 225.30 will require you to bring a single 200 amp feeder to the building.

Why wouldn't a single 100a feeder be compliant?

 

[ctaylo360860]

Really appreciate the input…. Sorry my pictures and drawing are so crappy but hopefully they make sense!

 

[LarryFine]

Service dis will be bonded and everything else will be isolated… I need g rod at the house because separate structure…

Correctamundo.

The picture should show what I’m trying to accomplish….

And of course abandon the existing drop.

 

[ctaylo360860]

Why wouldn't a single 100a feeder be compliant?

I was wondering if he thought the overhead was still staying…. All the overhead is being removed I should have pointed that out ….

 

[don_resqcapt19]

Why wouldn't a single 100a feeder be compliant?

I thought he wanted to supply two 100 amp panels?