Jim1959
Senior Member
- Location
- Longmont, CO
Having a hard time finding how to size LBs for larger conductors.
Per 314.16(C) Conduit Bodies.
(1) General. Conduit bodies enclosing 6 AWG conductors or
smaller, other than short-radius conduit bodies as described in
314.16(C)(3), shall have a cross-sectional area not less than twice
the cross-sectional area of the largest conduit or tubing to which
they can be attached. The maximum number of conductors permitted
shall be the maximum number permitted by Table 1 of
Chapter 9 for the conduit or tubing to which it is attached.
How about larger conductors?
Per 314.16(C) Conduit Bodies.
(1) General. Conduit bodies enclosing 6 AWG conductors or
smaller, other than short-radius conduit bodies as described in
314.16(C)(3), shall have a cross-sectional area not less than twice
the cross-sectional area of the largest conduit or tubing to which
they can be attached. The maximum number of conductors permitted
shall be the maximum number permitted by Table 1 of
Chapter 9 for the conduit or tubing to which it is attached.
How about larger conductors?