spa and swimming pool GFCI

Status
Not open for further replies.
hello guys :

i have a question here about this set up this guy asked me but i polietly bow out of this one until i get this issuse sloved


anyway here it is

the spa is 8 feet away from pool edge and the question about using the disconnection switch for spa tub [ more than 5 feet away from spa edge to wall ]

this set up is indoor usage so i dont know how it will cover related with the codes i have few conflets between the two so if you can high lighted where the codes will fall in this area so i can prepared to see if i can take this job or hand over to other EC

that why i want to ask it ahead of the time before i do any upgrading the electrical system in the pool room

Merci , Marc
 
George :

The question is the disconnect switch for spa tub and swimming pool disconnet switch both must be on sight of view or can be in the pump room ??

because i feel this is not a really safe set up and i need some kind of referince related to the code for disconnection switch.

I know the spa required a disconnecion switch 5- 10 feet away from edge of the tub but this is indoor usage so i dont know if the NEC do cover indoor verison.

the pool pump disconnection switch is located in the pump room which i feel it is not safe at all in case of emegercy sisuation arise.

so , i just want get all the facts with NEC code line up so i can dealt with the comuster with this set up and if he dont budge i will call the inspector to help me on this matter

Thanks for taking your time to read this

Merci , Marc
 
Hot tub indoor installs refer you to parts 1 & 2 of art. 680. 680.12 requires a disconnect to be readily accessible & within site from it's equipment. That would also apply to a pool. Is this a dwelling unit? Ron
 
Ron :

yes one location is at resdential location and the second one i just got the details today at commercal area [ city pool centre ]

that why i want to be very carefull with this code reguarding the spa and pool set up


Thanks for the art 680.12 i was reading on 02 code cycle and reading the 05 code cycle and somehow i got lost with translation due i have NEC code printed in french but somehow the words just dissapair on me :eek:

so that why i want to ask you guys for head up so i am in right track


Many thanks again

Merci , Marc
 
Status
Not open for further replies.
Top