Square D Power Logic

[jonrie1]

I've inherited a power system that contains a single Square D Circuit Monitor (#2350) which monitors the main power, six Power Monitors (#PM620) which monitor the air circuit breakers and a single Ethernet Gateway(EGX200). As I've been trying to get everything running, I've discovered that the only thing the gateway does is to make the RS485 devices available over Ethernet. This model does not have any monitoring or logging capability like the EGX400 does, and therefore I would need software like Square D SMS. Unfortunately, the site does not have the budget to purchase that software, and it does not make much sense for such a small system. I came across a item in the manual that briefly mentions 3rd party software, but it did not provide any details.

Does anyone know if any inexpensive/free software that I could use in conjunction with the hardware I already have to get to data from these devices? Any help would be appreciated. I will also post this in the general forum as well.

 

[jim dungar]

If you are looking for data logging software, I cannot help.

If you are looking for software to get information from each meter, one at a time, you could try Schneider Electric's PMCU. PMCU is like a stripped down version of SMS.
This is a link to their FAQ page, it will have a link to the actual download site.
http://www2.schneider-electric.com/...ang=en&locale=en_US&id=FA212811&redirect=true

 

[Ceitsa]

I've inherited a power system that contains a single Square D Circuit Monitor (#2350) which monitors the main power, six Power Monitors (#PM620) which monitor the air circuit breakers and a single Ethernet Gateway(EGX200). As I've been trying to get everything running, I've discovered that the only thing the gateway does is to make the RS485 devices available over Ethernet. This model does not have any monitoring or logging capability like the EGX400 does, and therefore I would need software like Square D SMS. Unfortunately, the site does not have the budget to purchase that software, and it does not make much sense for such a small system. I came across a item in the manual that briefly mentions 3rd party software, but it did not provide any details.

Does anyone know if any inexpensive/free software that I could use in conjunction with the hardware I already have to get to data from these devices? Any help would be appreciated. I will also post this in the general forum as well.

Hello Jornie, I'm also looking for SMS software, I'd really appreciate if you could teel me if you had any luck on your search.