SS 12/24 Robertson head machine

[chris kennedy]

I'm looking for Stainless #2 Robertson head 3/4" pan head machine screws, Google fail.

Anyone have a good fastener site for me?

Thanks

 

[augie47]

Not exactly what you need but there is a contact that might help you.

https://www.ebay.com/itm/8-Square-D...hash=item4d5c5553c7:m:mQzXYPflNIAA7_Y4dWASs6g

 

[chris kennedy]

Thanks Gus but I believe I need a link to a specialty hardware site.

 

[hbiss]

Best bet is to call one of the big fastener suppliers and ask them. Oftentimes just because they don't list something, it doesn't mean that they can't get it for you. How many do you need?

-Hal

 

[chris kennedy]

I stand corrected, I can use the allen 1/4 20's.

Thank you sir!

 

[chris kennedy]

How many do you need?

-Hal

24 but don't mind buying 100 just to have them as stock. For MPD's on the water down here. The 10/32's the gear come with always strip out.:blink:

 

[sameguy]

I'm looking for Stainless #2 Robertson head 3/4" pan head machine screws, Google fail.

Anyone have a good fastener site for me?

Thanks

Advantec store they are flat head Robertson, I just googled don't know the store.

 

[Little Bill]

When I need SS I use Fastenal, they have a local store. Not sure if they have on-line ordering or not.

https://www.fastenal.com/

 

[ActionDave]

When I need SS I use Fastenal, they have a local store. Not sure if they have on-line ordering or not.

https://www.fastenal.com/

:thumbsup:

 

[mtfallsmikey]

Until now, I honestly could not say that I knew what a Robertson head was, square drive, or clutch head, as they used to be known by. My first experience with them years ago was in mobile/manufactured home construction.

 

[kwired]

Until now, I honestly could not say that I knew what a Robertson head was, square drive, or clutch head, as they used to be known by. My first experience with them years ago was in mobile/manufactured home construction.

Clutch head AFAIK is what they call those with the bow tie shaped socket in the head.

 

[mtfallsmikey]

Clutch head AFAIK is what they call those with the bow tie shaped socket in the head.

That is correct, also have seen Bristol drives in some of my ham radio gear.

 

[texie]

I'm looking for Stainless #2 Robertson head 3/4" pan head machine screws, Google fail.

Anyone have a good fastener site for me?

Thanks

Mitchell's in the Falls area off 87th Ave and 132 St. They would get it in titanium, gold plated, whatever if needed. 305-251-3428