steve holt
Member
- Location
- Hawaii
Are there any NEC or manufacturer restrictions on the number of single gang surface wire mold extension boxes that can be stacked?
Stacking Surface Extension Wiremold Boxes
- Thread starter steve holt
- Start date
- Location
- Tennessee NEC:2017
- Occupation
- Semi-Retired Electrician
Nothing in the NEC.
I have to ask why?
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
I have to ask how many?
winnie
Senior Member
- Location
- Springfield, MA, USA
- Occupation
- Electric motor research
Just enough to make a meme ...
busman
Senior Member
- Location
- Northern Virginia
- Occupation
- Master Electrician / Electrical Engineer
I once saw 7 1900 box extension rings in a finished wall. Somewhere I have a picture, but it was way back around 2008 in a church.
Mark
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
busman
Senior Member
- Location
- Northern Virginia
- Occupation
- Master Electrician / Electrical Engineer
Looked just like that, but concealed in a finished wall with a receptacle on a mud ring at the end. Looked like some sort of Tolkien tunnel inside. God forbid you needed to access the ground screw. Two-foot nut driver?
Mark