Supply side

[pedro1200]

SSBJ are sized per t.250.102c because its on the supply side with no overcurrent protection. Is it safe to say that all other bonding jumpers are on the load side even though they also sized to t.250.102c

 

[infinity]

Is it safe to say that all other bonding jumpers are on the load side even though they also sized to t.250.102c

What are the other bonding jumpers from that table? Are they typically before or after an OCPD?

 

[pedro1200]

What are the other bonding jumpers from that table? Are they i was asking because they are on the same table

 

[pedro1200]

Yes they are I was asking because I wanted to know why are they all on the same table

 

[don_resqcapt19]

Yes they are I was asking because I wanted to know why are they all on the same table

Take a look at 250.102(D)

 

[pedro1200]

Take a look at 250.102(D)

Thank you but that doesn’t answer my question

 

[don_resqcapt19]

Thank you but that doesn’t answer my question

Sure it does...It tells you to use Table 250.122 and not 250.102 when the bonding jumper is on the load side of an OCPD.

 

[pedro1200]

Sure it does...It tells you to use Table 250.122 and not 250.102 when the bonding jumper is on the load side of an OCPD.

Ty