Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
Is this a bit odd for the supports? I'd think they should be stainless or pvc coated.
Supports
- Thread starter Alwayslearningelec
- Start date
- Location
- New Jersey
- Occupation
- Journeyman Electrician
Are you thinking that a different material will last longer?
Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
no. just thought stainless or pvc coated would make more sense because of the raceway type.
Seven-Delta-FortyOne
Goin’ Down In Flames........
- Location
- Humboldt
- Occupation
- EC and GC
They did spec pvc coated 
SS is difficult to source, expensive, and from what I’ve heard, difficult to work with. I have no experience with it however.
SS is difficult to source, expensive, and from what I’ve heard, difficult to work with. I have no experience with it however.
- Location
- Illinois
- Occupation
- retired electrician
I would expect that the straps would be specified as PVC coated. Standard clamps will not fit correctly because of the increased outer diameter.
Note this type of installation requires additional labor, training, and special tools to prevent damage to the outer PVC protective surface. It is also expensive. Some specs require that the installer be certified by the PVC coated conduit manufacturer.