proger3776
New member
where in the code book does it say you must tape the white wire black when using it as your return to the fiture
switch leg
- Thread starter proger3776
- Start date
- Status
websparky
Senior Member
- Location
- Cleveland, Ohio
Re: switch leg
NEC 2002 200.7
NEC 2002 200.7
luke warmwater
Senior Member
Re: switch leg
You cannot use the white wire as the return to the fixture regardless.
200.7(C)(2)
The white must be re-identified permanently when used for the supply in the switch loop.
You cannot use the white wire as the return to the fixture regardless.
200.7(C)(2)
The white must be re-identified permanently when used for the supply in the switch loop.
- Status