TELSTA A28D Bucket controls acting up

[Oldmanfunk]

Hello everyone and thank you for allowing me to visit your forums.

Recently I purchased a 1994 F-450 with a A28D Bucket on the back for the purpose of changing out light fixtures (under canopy / light poles) at my customers locations. Problem I'm having with my truck is that the controls on the boom are acting up intermittently. The controls down low in the right rear panel all work fine. The truck came with the complete TELSTA owners / service manual which includes a complete wiring schematic, but I'm still lost of where I should start.

Anyways, I was hoping to pick the brains of the guys that work on these trucks and maybe they will able to steer me in the correct direction. I'm hoping that this is a common issue and that there is a common fix.

Thank you in advance for any and all help that is sent my way...

 

[George Stolz]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC? Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

If you feel this action to be in error, feel free to contact me via PM to explain.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the top right corner of the post.