Thhw or thwn failure in wet conduit

Status
Not open for further replies.
Thanks again everyone for all of the good info. I now need to go finish the job and be done with it. Later. :)
 
In my opinion one reason is because few ECs seal each end of the conduits letting air pass through the raceway, the water in the air condenses and collects in the low spots.

Iwire,

I pack 'Duct Seal' (fibrous, oily, sealing clay putty) into the conduit of refrigerator boxes so the condensation does not drip/seep into the switch devices.

...
 
The reason plumbers keep water in is because they use cleaner then glue on their pipes. If we took the time to properly glue and duct sealed each end we wouldn't have a problem either.
All the primer/cleaner and glue in the world won't stop condensation.
 
Status
Not open for further replies.
Top