Time to Rough In & Finish Single Families

Status
Not open for further replies.
Re: Time to Rough In & Finish Single Families

Hehe, that's really funny since we do mostly commercial/industrial. Currently we are wiring a house and were totally lost since there wasn't a print. Finally a nice lady brought us a print with switchs and lights on it. We have done much better since then.
 
Re: Time to Rough In & Finish Single Families

There is definitely a different mind set. I started off in commercial and have since moved into condo/resi. The other day I went and helped a commercial buddy of mine out on a commercial job. The pace was entirely too slow for my liking. In a house its balls to the walls and I just find it funner. Now as far as pride I take quite a bit of pride in my work. Those holes better be straight and 90s formed in the romex. But dont lose speed. A 1500 sq ft house to me should take 16 hours to rough and 16 hours to trim. Thats ride time and all. 3 minutes to trim a device 5 if youre green or youre off my truck
 
Re: Time to Rough In & Finish Single Families

Your welcome to all that residential.I did it for 20 years.Now all i want is commercial /industrial.Not near as booooring.
 
Re: Time to Rough In & Finish Single Families

I did industrial for the first eighteen years. I've been doing residential for the last four, would never go back.
 
Status
Not open for further replies.
Top