PaulEd
Member
- Location
- United States
Thoughts? Seems to be this is a clear violation as the conduit is not bonded on either side or either one side.
What say you all?
Transformer
- Thread starter PaulEd
- Start date
Thoughts? Seems to be this is a clear violation as the conduit is not bonded on either side or either one side.
What say you all?
- Location
- New Jersey
- Occupation
- Journeyman Electrician (retired)
Yes a violation as shown in the photo without being bonded to both ends of the raceway unless it's aluminum which is could be with the label, threaded end and the thread less connector.
PaulEd
Member
- Location
- United States
So if it’s aluminum conduit it’s permissible?
- Location
- New Jersey
- Occupation
- Journeyman Electrician (retired)
Yes non-ferrous raceways containing a GEC do not require bonding at both ends to the GEC. So non-ferrous raceways such as PVC, aluminum, etc. do not need to be bonded.
ggunn
PE (Electrical), NABCEP certified
- Location
- Austin, TX, USA
- Occupation
- Consulting Electrical Engineer - Photovoltaic Systems
The conduit is not necessary, is it?
- Location
- New Jersey
- Occupation
- Journeyman Electrician (retired)
No it's not required for what's shown in the photo. I would be more concerned with how's it's terminated at both ends of the GEC.