Electric medic
New member
- Location
- Pittston, PA
I installed a new square D 20 amp breaker. Ran 12/2 to j box. I have 2 branches coming out also 12/2 (power going to light) ran 12/2 to switch using neutral as a hot leg. Did the same for the second branch. My problem is once I flip the breaker on it shoots a spark spray and Trips that breaker and also the main disconnect 4 times. Inspected all wires with tight splices no shorts no nicks in Romex when pulling. What could be the cause of this?!? I’m an electrical student so I’m not well versed in troubleshooting.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk