I am in the process of roughing in a basement kitchen.
The owner is having a total of 6 - 24" under counter wine/ beer coolers.
The only electrical data I can get is in the install manual. It states that each unit should be served by a dedicated 15/20 amp 115 V un switched grounded receptacle.
I called a Kitchenaid store and the salesperson is telling me that each unit has an electrical requirement of approx 1 amp.
Anyone here familiar with these types of units?
There must be some type of compressor along with lighting that would seem to consume more than 1 amp.
I can't see pulling 6 home runs if the total load of all the units is say under 10 amps
Any insight appreciated.
The owner is having a total of 6 - 24" under counter wine/ beer coolers.
The only electrical data I can get is in the install manual. It states that each unit should be served by a dedicated 15/20 amp 115 V un switched grounded receptacle.
I called a Kitchenaid store and the salesperson is telling me that each unit has an electrical requirement of approx 1 amp.
Anyone here familiar with these types of units?
There must be some type of compressor along with lighting that would seem to consume more than 1 amp.
I can't see pulling 6 home runs if the total load of all the units is say under 10 amps
Any insight appreciated.