The cheesiest drives I've dealt with lately are the Cutler Hammer MX? line. Stubbing a bunch of 1" conduits into the bottom of several 15-20 HP drives and the locknuts barely fit in the wiring compartment. So little room in fact it angles the connector because the locknut won't hardly sit flush.:roll: And they come factory with an oversized 1" knockout!!
On top of that the wiring compartment is 2"x2" so there is no room to maneuver your wires. I can't even believe someone designed something like this.
Third, what's up the split-bolt-like grounding stud in these things?? They couldn't use a terminal entry like the line/load conductors use?
All done now, I feel better.:grin: