Houston714
Member
- Location
- Nashville Tn
Hi all, how much voltage should be on a neutral (neutral to ground) that is on a multiwire branch circuit, whether at the panel or on a break at the neutral down stream. 45 lights. 277, 3 hots per neutral.
One light is A leg, one light is B leg, one light C is leg and runs like that all the way down to the end. I'm reading 200 plus volts on the neutral (neutral to ground) midway down. Thanks for some great input. I read on some post from years back that if there is load on the circuit I should see voltage.
One light is A leg, one light is B leg, one light C is leg and runs like that all the way down to the end. I'm reading 200 plus volts on the neutral (neutral to ground) midway down. Thanks for some great input. I read on some post from years back that if there is load on the circuit I should see voltage.