Am installing T5 HO 6 lamp high bay fluorescent fixtures in a warehouse 30ft. ceiling will hang from jack chain at 20ft. There are 130 lights I have never hung this amount before so I am concerned about getting the hour per fixture correct. Does on hour per fixture with two guys sound right that would include conduit and whip. The area is 250ft. x 180ft. There would be a total of 42,120 watts. Not sure the best way of bringing power can I branch off of 30amp 208 runs seven total or will I need to bring eleven 20amp circuits. Would switching be best from two relays?
Any input would be appreciated.
After research apparently they dont come in 208 need to see if I have 277 available at panel
Any input would be appreciated.
After research apparently they dont come in 208 need to see if I have 277 available at panel
Last edited:
