27hillcrest
Senior Member
A little confused as to how to wire the well pump. The well guy left me a Franklin Electric control box to wire in the pump. After looking things over the control box has L1, L2 (240 volt feed from panel) B(main) Y and R(start).
Coming out of the well there are 3 wires Black, Red (240volt pump leads) Green (ground) No Yellow. There is a presure switch for the pump witch is easy enough. The question is do I need a yellow wire to the pump? Or is there a different control box needed? Link to control box wiring.
http://www.mikeholt.com/code_forum/attachment.php?attachmentid=222&stc=1&d=1162848155
Coming out of the well there are 3 wires Black, Red (240volt pump leads) Green (ground) No Yellow. There is a presure switch for the pump witch is easy enough. The question is do I need a yellow wire to the pump? Or is there a different control box needed? Link to control box wiring.
http://www.mikeholt.com/code_forum/attachment.php?attachmentid=222&stc=1&d=1162848155