Recessed vs Surface LED luminaire
Recessed vs Surface LED luminaire
Wow, it is very difficult to develope complete products when you are new in the electrical installations.
In summary my main problems are:
LED CEILING SURFACE LUMINAIRE (Voltage 33VDC)
- I would like to install the driver and connections inside the outlet box in order to avoid ground connection in the metal luminaire body
- If I use a deeper canopy sure that I can install my driver but I don't know if I have to connect the metal luminaire to ground
LED RECESSED LUMINAIRE (Voltage 33VDC)
- If I'm only theluminaire manufacturer, my obligation is only to list/certificate the luminaire according to UL stanndard. But the installation means (outlet boxes, housings...) are obligation from installator. Isn't?
- All my luminaires are Non-IC because if I put isolating material the temperature is greater than 90ºC so the UL certification is failed. So, I can sell my luminaire as "Non-IC" directly or I can offer a "IC housing" to get the IC option. Isn't?
- Should be listed the IC housings?
- I would like to offer too a mounting frame for new constructions, but with possibilities for different sizes (3,4,5 inches) Do you know any universal piece and supplier?
- Also I would like to have a mounting frame with the possibility to add a box for changing into IC. Is it possible?
- Do you know a good supplier/shop for IC housings, mounting frames and similar?
- Is it possible to find an IC housing where a luminaire can be fixed with lateral springs like in the next photo?
Thank you for all your help.
Best regards friends.