Open Neutral
Senior Member
- Location
- Inside the Beltway
- Occupation
- Engineer
In a large residence, the existing CT can will soon be a junction box; the CT's have to be outside in a new can.
With them go the terminals that tied the dual MCM-350 feeds to the 4 panelboards.
I'm seeking something like ¼-20 bolts on insulated mounts to fasten into the junction box and then join the 6 lugs.
Or another type of connection to accomplish the same task. (A gigundous Jones Barrier strip?)
Suggestions?
With them go the terminals that tied the dual MCM-350 feeds to the 4 panelboards.
I'm seeking something like ¼-20 bolts on insulated mounts to fasten into the junction box and then join the 6 lugs.
Or another type of connection to accomplish the same task. (A gigundous Jones Barrier strip?)
Suggestions?