Whole House Surge Suppressors
- Thread starter Sparky555
- Start date
- Status
brantmacga
Señor Member
- Location
- Georgia
- Occupation
- Former Child
are you looking for name brand? i've always used square D. I have a buddy that just introduced me to ditech surge suppressors. I haven't used one yet, but it supposedly has a lifetime replacement warranty. Someone else told me they weren't very good though.
sparkyjim
Member
- Location
- Dallas, TX
I use, http://www.panamax.com/Products/Other/GPP8005.aspx
and have had good luck with them. Do a search someone was talking about a unit that spec'd out good, but was pretty pricey.
and have had good luck with them. Do a search someone was talking about a unit that spec'd out good, but was pretty pricey.
mdshunk
Senior Member
- Location
- Right here.
www.stediwatt.com
This is the one used at The White House, and even on board Air Force One. It's the one I install.
This is the one used at The White House, and even on board Air Force One. It's the one I install.
ultramegabob
Senior Member
- Location
- Indiana
brantmacga said:
I have installed many differnt brands and styles of surge suppressors, I have no clue how reliable any of them are. What exactly did they say was wrong with he ditechs?
billsnuff
Senior Member
- Location
- East of 480sparky
consider what the gov't pays for toilet seats and hammers, i wouldn't say that this is a glowing reccomendation.
OTOH if you use it, it's good enough for me.
brantmacga
Señor Member
- Location
- Georgia
- Occupation
- Former Child
ultramegabob said:
he didn't go into detail. On second thought though, I'm not sure how reliable the source was. He sells panamax and was trying to push them on me and probably would've said anything was bad compared to panamax. My EC friend that is using them hasn't complained. He said they've replaced a couple that were hit w/ no problems from the manufacturer.
growler
Senior Member
- Location
- Atlanta,GA
mdshunk said:
I Herd those cause brain damage.
It's just a little joke folks. W. was born that way.:grin: :grin:
Jeff Weissman Electric
Member
- Location
- Park City, Utah
I Have been installing the Ditek DTK 120/240cm+ surge protectors for 10 years or more. Never had a problem with them at all. Ditek does make other surge protectors for larger installations but the 120/240cm+ fits 200amp single phase panels & is reasonable enought to stock on my truck.
I charge $175 installed for this surge protector. It not anything I'm going to get rich with. Its sort of a loss leader or even a service I provide my customers.
I charge $175 installed for this surge protector. It not anything I'm going to get rich with. Its sort of a loss leader or even a service I provide my customers.
sparkyjim
Member
- Location
- Dallas, TX
This is the other unit we use: http://www.maxivolt.com/index2.htm
nice unit, install more panamax's now because they are what the supply house carries.
nice unit, install more panamax's now because they are what the supply house carries.
Ragin Cajun
Senior Member
- Location
- Upstate S.C.
mdshunk
Senior Member
- Location
- Right here.
I've been using the SurgPatrol one, mostly.Sparky555 said:
ohm
Senior Member
- Location
- Birmingham, AL
When these things first came out I bought the biggest 480V 3Ph box I could find. They didn't say what was in the box but, the warranty would be void if the rivets were drilled out, which I promptly did.
Found handfuls of MOV's soldered L-L & L-G hard to say if they worked, but our computers didn't need new motherboards quite as often after we installed it.
After that I would always solder three 130 V MOV's in all my equipment.
Found handfuls of MOV's soldered L-L & L-G hard to say if they worked, but our computers didn't need new motherboards quite as often after we installed it.
After that I would always solder three 130 V MOV's in all my equipment.
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
That makes it good for 390 volts, right?ohm said:
- Status