Wire bender

[sheldon]

Has anyone seen or heard of a wire bending tool for bending cables inside a cabinet,panel switch ect.,for cables size #2 to 500mcm.

 

[tkb]

Re: Wire bender

Greenlee 796 cable bender.
Check it on their web site.
It is in the "Wire and Cable Termination" section.

 

[RAM460]

Re: Wire bender

GreenLee Makes a Ratcheting Cable Bender - Catalog # 796 or a Hydraulic one - Catalog # 800. I am sure you could find them online. I own a Ratcheting one, it works pretty well.

 

[peter]

Re: Wire bender

Rack-a-Tiers makes one called a "Bend-All" for $27.
~Peter
http://www.rack-a-tiers.com/pro_bendall.htm

[ February 27, 2005, 08:56 PM: Message edited by: peter ]

 

[luckyshadow]

Re: Wire bender

I had one made on the job site a few years back . Works great . I took some 3/4 rigid and fashioned them into a capital letter F, then had the steel erectors weld it together. After working with it, and cutting the "arms" , grinding them smooth I have a perfect bending tool that will help bend 750 mcm on down. I even showed it to a couple inspectors to get their opinion and they liked it