Has any one had to wire a modular home. It seems pretty straight forward and I was wondering what to charge. I am in NJ and and without looking at the plans in depth I am guestimating about $5,000. Below are my responsibilties.
1. Provide and install service entrance cable to each panel box and connect all inter-modular wires from modular to modular, or to main panel.
2. TV and telephone jack cables will be separately run by manufacturer to accessible areas for connection.
3. Must complete all circuits and inter-modular connections in compliance with local codes, including main service entrance installation. All circuits and electrical connections must be tested as required by local codes.
4. Install exterior door lights and interior shipped-loose items.
5. Run electric for air conditioner with main shut-off outside/per code.
6. Run line for emergency gas shut off/per code.
7. Run line for ceiling lights in crawlspace or basement/per code.
8. Test all interior and exterior lights, fans, switches, and outlets.
1. Provide and install service entrance cable to each panel box and connect all inter-modular wires from modular to modular, or to main panel.
2. TV and telephone jack cables will be separately run by manufacturer to accessible areas for connection.
3. Must complete all circuits and inter-modular connections in compliance with local codes, including main service entrance installation. All circuits and electrical connections must be tested as required by local codes.
4. Install exterior door lights and interior shipped-loose items.
5. Run electric for air conditioner with main shut-off outside/per code.
6. Run line for emergency gas shut off/per code.
7. Run line for ceiling lights in crawlspace or basement/per code.
8. Test all interior and exterior lights, fans, switches, and outlets.