electrofelon
Senior Member
- Location
- Cherry Valley NY, Seattle, WA
I have a 1200 amp switchboard. There is currently a 200 amp feeder to an ats. I am planning to run the load side of the ats back to the switchboard and feed two 200 amp feeders that are currently supplied by the switchboard. I was planning to connect the three cables per phase either with Polaris style connectors or a terminal block mounted to the top or side of the switchboard. Does anyone see any issues with this in terms of splicing, bending space, fill, etc? This is an unfamiliar jurisdiction for me and I just want to be prepared for a real picky inspector. Thanks