JHarbinson
Member
- Location
- SF Bay Area
- Occupation
- GC
Remodeling a bathroom. Installed new dedicated 20A circuit but panel (Siemens) only has room of a single narrow breaker so unable to use an AFCI breaker. 12ga NM already run from panel to bathroom (done by others before I arrived). My thought is install a dead front combo AFCI/GFCI in a box just above the panel fed by MC or EMT then feeding the NM. Sound kosher or do I need to rerun the NM as MC to the outlet and use a OBC combo AFCI/GFCI?