jeff48356
Senior Member
- Location
- Livonia, Michigan
If I'm installing a 225A residential service in Tennessee, would I use 250 or 300 kcmil aluminum conductors? I've never installed anything larger than 200A, which uses 4/0 AL.
225A service conductors
- Thread starter jeff48356
- Start date
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
What is the calculated load current?
curt swartz
Senior Member
- Location
- San Jose, CA
- Occupation
- Electrical Contractor
If the conductors are supplying all loads see 310.12
250 KCMil aluminum or 3/0 copper work for sure. You can use the 83% ampacity rule if this service or feeder entirely supplies a dwelling which means 250KCMIL is good for 247 amps. 3/0 copper is good for 241 amps. 4/0 aluminum is good for 217 amps.