Cutting 6” opening in soffit

[markebenson]

Klein holesaw but let me give you more importanr info. This soffit matrial is terrible. Think about using 10" medallion for $10 each. Otherwise is will never look good.

 

[Hv&Lv]

Because it's sharpened on the wrong side of the tooth? (Not very knowledgeable about saw tooth sharpening)

Cheers, Wayne

AHA!
now I get it...
A little slow sometimes..

 

[flashlight]

So if this idea is so useful, why can't I find any negative hook angle hole saws? [I take it that would have the same effect.]

Cheers, Wayne

Come to think of it, in the early years I used to re-sharpen the expensive sawzall blades with a dremel. You could probably take an old
hole saw and make it into a negative hook blade pretty easily. But, as mentionened above, why bother when you can use reverse ?

 

[JZE14]

I use a Roto-Zip with an attachment to make round holes.