mstrlucky74
Senior Member
- Location
- NJ
So would like to feedback on the layout of fire alarm cabling. I understand Class A returns and a/b(alternating circuits), NAC & IDC. On the attached drawing( lines look like dog sh&^) I roughly drew in how I think the cabling would be run in field to the NAC devices( I didn't do each one). I know there would be separate pair for the speakers and strobes. Just referring to the power limited fire alarm cabling.
1. The cabling would have to be(normally) daisy chained to each device, correct as shown?
2. Is this how, more or less, the cabling would be run or would there be a different/better routing of the cable(s)?
And I know the cabling is starting at FCC but it would come from the DGP.
Not bidding this( lollol) just looking for some insight.
Thank you.
1. The cabling would have to be(normally) daisy chained to each device, correct as shown?
2. Is this how, more or less, the cabling would be run or would there be a different/better routing of the cable(s)?
And I know the cabling is starting at FCC but it would come from the DGP.
Not bidding this( lollol) just looking for some insight.
Thank you.
Attachments
Last edited: