FPE breakers fire hazard?

Status
Not open for further replies.
J

Joseph Alexander

Member
We do a lot of work for realtors/home inspections and every so often we hear that stablock breakers are a fire hazard! I've looked at the CPSC site they say they investigated and found them OK. Is there any evidence to the contrary?
 
Joe, this is a pretty common question. Do a search on this forum for FPE breakers and you'll find a wealth of information.
 
Any Jurisdictions that ban stab-loc

Any Jurisdictions that ban stab-loc

I appreciate the response but this data is all 1/4 of a century old. I would think that if these breakers are such a hazard (and I do believe that they are) that some jurisdiction would ban them or issue some edict about them. Does anyone know about any jurisdiction or authority that has taken action about these bad boys.
 
Joseph Alexander said:
I appreciate the response but this data is all 1/4 of a century old. I would think that if these breakers are such a hazard (and I do believe that they are) that some jurisdiction would ban them or issue some edict about them. Does anyone know about any jurisdiction or authority that has taken action about these bad boys.
Click to expand...
If you would take the time to do a search, you would plainly see that the info is not 1/4 century old....here's a hint:
New Jersey, Yacout, Class Action, 2004
 
Last edited:
FPE and Zinsco dedicated to being weldomatic early day risk? Say it ain't so!

Go here for a bigger picture as to selecting gear!
 
They are definitely a bad design. I encourage people to replace them or put it in there budget. I have seen them fail to trip on more than one occasion. There is a reason they lost there UL approval many years ago.
 
While having one of my jobs inspected, the HO asked in there was any problem with FPE...the inspector basically said it was all hype...I disagreed citing the Yacout Class Action...which left the HO at square one.

This inspector and I have known each other for years, I wasn't about to get into a debate in front of my customer....after the inspection was over, I gave the HO one of the printouts I carry in regards to FPE.

The HO can read the info, do their own research and call me back.
 
Status
Not open for further replies.
Top