Fridays pics

[chris kennedy]

Since one of our regular Fridays Pictures posters is in the middle of a boycott now, I will post three.:smile: Not real interesting but...

I got a chuckle out of these two today. I would have installed the LFNC a bit neater.

And if your still cold, here is Al working up a nice sweat on 2/12/09.

 

[JohnJ0906]

Poor Al - every time you post a picture of him, it seems he is in a trench. What's up with that? :grin:

 

[SEO]

The sunshine looks great! I can't wait.:smile:

 

[chris kennedy]

Poor Al - every time you post a picture of him, it seems he is in a trench. What's up with that? :grin:

He digs very slowly.

 

[BryanMD]

Poor Al - every time you post a picture of him, it seems he is in a trench. What's up with that? :grin:

When Chris hired him Al made the mistake of saying he was "willing to start at the bottom". See what that gets you?

 

[electricalperson]

what are the RNC sticking up for?

 

[chris kennedy]

what are the RNC sticking up for?

Pool feeder. Hand hole was installed there today.

 

[peter d]

what are the RNC sticking up for?

It's going to be for communication lines to launch nuclear missiles.

 

[chris kennedy]

It's going to be for communication lines to launch nuclear missiles.

No sir, we use RMC for that.

 

[electricalperson]

Pool feeder. Hand hole was installed there today.

we had an inspector around here that failed one of my underground services because i didnt put a male adapter and a bushing on the pvc pipe in the handhole

 

[chris kennedy]

we had an inspector around here that failed one of my underground services because i didnt put a male adapter and a bushing on the pvc pipe in the handhole

I always do and use duct seal crammed in the conduits. Keeps the sand out in the event I need to pull something else in later. I will get some pics of the hand hole installs tomorrow.

 

[Cow]

Is underground all you guys do? Or just the only thing you take pics of?

we had an inspector around here that failed one of my underground services because i didnt put a male adapter and a bushing on the pvc pipe in the handhole

352.46 requires a bushing. Do you think you should of got away with it?:-?

 

[jumper]

He digs very slowly.

and forgets to use primer on the rnc, that joint at feet looks pretty clean-no purple in sight and only one can in sight.:wink:

 

[peter d]

and forgets to use primer on the rnc, that joint at feet looks pretty clean-no purple in sight and only one can in sight.:wink:

Does anyone use primer on electrical conduit? I've never once seen it used.

 

[izak]

what about PVC bell ends instead of an adaptor and a bushing?

 

[chris kennedy]

Is underground all you guys do? Or just the only thing you take pics of?

I take a lot of underground pics for locating purposes.

 

[Cow]

Does anyone use primer on electrical conduit? I've never once seen it used.

Me either.:-?

what about PVC bell ends instead of an adaptor and a bushing?

That's what we use, unless I can't find 'em. Then it's back to an MA and PB.

 

[SEO]

Does anyone use primer on electrical conduit? I've never once seen it used.

I've seen homeowners use it on electrical conduit many times.(pvc).

 

[jumper]

Does anyone use primer on electrical conduit? I've never once seen it used.

not required as far as i know, rnc is not pressurized like water pipe, but imo it will make a better joint to with stand stress on joints,like in frost conditions.

 

[Karl H]

I've never used primer for RNC.