sundowner
Senior Member
- Location
- West Wisconsin
Good morning all - I'm involved in a multi building, multi generator project where 5 of my buildings will be getting padmount gen-sets. Gas, 150KW capacity - my question is about an E-stop and if (why) they are required - how do you guys do this - I certainly don't want to E-stop a loaded gen-set. I also don't want to expose my building loads to a coasting gen. I see other buildings on campus have an E-stop near the pad mount gens but I imgine only for the gas solenoid. I'll try to verify this in the prints, Nothing in 445 spells anything out either.
Should I even recommend an E-stop install.
Looking for a little advice - ??
Should I even recommend an E-stop install.
Looking for a little advice - ??