Homeowner DIY

Status
Not open for further replies.
Re: Homeowner DIY

See we are so critical that we critisize our own work years later :D I have done the same thing myself over the years gone back to do something and said.Wish I would have done that another way now i ahve to go to egypt to get there and i was in nyc :D
Be proud great looking job
 
Re: Homeowner DIY

Originally posted by iwire:
the last few weeks I have been working at a large building that I helped bring out of the ground 10 years ago. I find myself criticizing a lot of my own work. :( :D
I have done the same thing on work I've done in the past. :D

Roger
 
Re: Homeowner DIY

I was looking at a pipe run and all I kept asking myself was "What the heck was I thinking?"

Actually my internal dialog is more R rated but gotta keep it clean here. :D
 
Re: Homeowner DIY

Originally posted by iwire:
I was looking at a pipe run and all I kept asking myself was "What the heck was I thinking?"
I suppose this was the one day you had no camera, right? :cool:
 
Re: Homeowner DIY

I just had to get in on this, how many out there have used good ole' 33 when you cut yourself to stop the leak?
 
Re: Homeowner DIY

As for the medical tape we call that hospital grade phase tape. I have been on a job and out of phase tape had to brake in to the first aid kit to get done before.
 
Re: Homeowner DIY

The bare ground is going out to the supplementary ground rod. It exits through a drain hole in the LB.
LB's come with drain holes?
 
Re: Homeowner DIY

Originally posted by fbhwt:
I just had to get in on this, how many out there have used good ole' 33 when you cut yourself to stop the leak?
More times than I would have liked. :eek:
 
Re: Homeowner DIY

Originally posted by steelbuster:
LB's come with drain holes?
Had to look a long time to find one :p .....inspector insited on it.
I guess I am just pure evil, I have been known to drill a small drain hole in LBs. :p

I do the same thing with bell boxes.
 
Re: Homeowner DIY

Quite a while back there was a thread about entering the back of a panel (probably loadcenter) bit you on bending radius...how deep is the panel? size wire?

Maybe there should be a violation for too neat of a panel...what are you trying to hide? :D
 
Re: Homeowner DIY

Nice try :roll: , you guys are always 'thinkin. No bend radius. Wall is 11" thick... staight in from the LB outside.

Maybe there should be a violation for too neat of a panel...what are you trying to hide?
You have a suspicious mind (primary requirment for inspectors?)
Obviously, I have WAY too much time on my hands.
 
Status
Not open for further replies.
Top