Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
We have about 600' of straight run of linear 1x4' lighting( they are tandem mounted). It's about 10' AFF. Thinking a lift would make for a quicker install than a ladder. Any thought?
Lighting Install
- Thread starter Alwayslearningelec
- Start date
- Status
- Location
- New Jersey
- Occupation
- Journeyman Electrician
How are they hung?
Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
They're actually supported to a kindorf/strut track that is remaining( it's actually the raceway too). We are only removing light and reinstalling new and connecting to extg. ckt.
- Location
- New Jersey
- Occupation
- Journeyman Electrician
If there are no obstructions for the lift then I agree with Mc a lift is the way to go.
masterinbama
Senior Member
- Location
- Huntsville Alabama
A baker's scaffold and 2 scared guys wobbling around.
Sent from my LML211BL using Tapatalk
Sent from my LML211BL using Tapatalk
- Occupation
- Licensed Electrician
Been there. Except it was one scarred guy, me, and one guy pushing, my old boss. We got a lot of work done for a two man crew. Those were the days.
Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
why would one use baker scaffold over lift or vice versa?
- Occupation
- Licensed Electrician
Because back in the day scissor lifts were an expensive luxury. So were microwave ovens and VCRs, cable TV was something your way cool friend had. Labor used to be cheep and tools were expensive. Times have changed and construction work has evolved quite a bit since then.
Get a lift for the guys changing the lights. There is no reason not to do it.
Get a lift for the guys changing the lights. There is no reason not to do it.
- Location
- New Jersey
- Occupation
- Journeyman Electrician
I agree lifts are a cheap especially given the labor rate of horsegoer's workers.
- Status