flounderhead59
Member
Installing a new big ol' Baldor 30HP motor with a huge 5" square connection box with a 2" unthreaded hole at the bottom. I was originally going to be concerned about water-tight integrity, but I noticed the windings are visible through the vents on the bottom. So I just need something to keep the 3/4" connector inplace so there is no strain on the wiring and connections. Using 3/4" because that's what was ordered before seeing the motor. I have heard numerous things will work, but what do you recommend to connect 3/4" flex connector to the connection box with the 2" untreaded hole