Multi voltage ballast

Not open for further replies.


New User
Pulaski, TN, USA
I have some T8, 6 bulb, high bay lights that have 120/277v ballasts in them. I want to wire these lights to 120V. The fixtures have red, black and white wires for the connection to the power supply. Do I wire the red and black wire to 120v hot leg? Or do I just wire the black wire to the hot leg and cap the red wire?


Senior Member
I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

  • Contractors
  • Electricians
  • Engineers
  • Inspectors
  • Instructors
  • Other electrically related individuals

* This NEC? Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.
If you feel this action to be in error, feel free to contact me via PM to explain.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the
button at the bottom left corner of the post.
Not open for further replies.