avtechdude
New member
- Location
- santa rosa, ca usa
I have read some posts here about this issue but I thought I would go at it one more time. the client calls and says "there are breaker problems". I show up and look at the service panel (that i installed several months prior with no issues or concerns) and i see the entire right side breaker bank is not tripped but in the "off" position. I say this cant be. Even some electrical anomaly cant cause each breaker, both 1 and 2 pole to move to the OFF position on one side of a load center. someone has to be turning them off. Even finding the entire side in the "trip" position can't be right as the power bus down each side is every other leg per lug. Just a simple voltage check each leg indicates all is well and the same from the meter/main shut off to the panel. My guess is the ex-husband is showing up while she is out. Am I missing anything?
thanks
thanks