opinions? parallel 1/0 or 300 copper

[wyreman]

Begin. To begin is half the work, let half still remain; again begin this and thou wilt have finished. - Ausonius

 

[LarryFine]

Begin. To begin is half the work, let half still remain; again begin this and thou wilt have finished. - Ausonius

"Words like 'refinish.' 'What’re you doing?' 'Refinishing a table.' Don’t you have to restart? You should." ~ George Carlin

 

[JoeyD74]

Hard to see it in the picture but why not just go strait up above the next window and eliminate the last 90?

 

[wyreman]

Closed out this job and it was a case of
the dog that didn't bark.

Wires slid right down the 2" pipe.
all good! thanks guys =)

 

[oldsparky52]

Closed out this job and it was a case of
the dog that didn't bark.

Wires slid right down the 2" pipe.
all good! thanks guys =)

Was it 1/0 or 300? How did you get the wire up to the weatherhead?

 

[wyreman]

300, 300, 2/0
built a platform and hoisted up the service pipe with a simple pulley
brought the wire down from the window above
the lube was hardly necessary


I do believe that building anything in your imagination first is very useful

 

[flashlight]

Well, that's great ! I got to the end of the thread and deleted what I was about to post, which had to do with maybe using 2 1/2 in pipe....