Rant about 2x4 lay in fixtures....

Status
Not open for further replies.
peter d said:
That's nice, but can you hold a 36 volt drill out sideways with a 1" auger bit and drill through a beam? Larry can. :D
Click to expand...

If the bit is sharp and the lead screw ain't toast,yeah!
I'm a Va. boy too!
If I knew how to put a smilie face in here I would. LOL
 
peter d said:
Well first you need Marc to megger it, then you need Iwire to see if the "luminaire" is code compliant, then you need Larry because only he's tall enough to replace lamps without a ladder, and then you need Marc again to make some witty comment about the whole process, and then you need someone here to make a post about how many guys it takes to change a light bulb, which goes on for 10 pages and then Iwire deletes the whole mess of a thread. :D
Click to expand...
I believe I could be usefull here also by confusing the terms GEC and EGC and I could also stand squirrel watch!:D
 
jrannis said:
Bulbs you plant in the ground. Lamps go in fixtures
Click to expand...


Unless you work in the cinema biz.....then it's Xenon bulbs going into the Lamphouse.. :grin: ;)

Edited to add:

peter d said:
Well first you need Marc to megger it, then you need Iwire to see if the "luminaire" is code compliant, then you need Larry because only he's tall enough to replace lamps without a ladder, and then you need Marc again to make some witty comment about the whole process, and then you need someone here to make a post about how many guys it takes to change a light bulb, which goes on for 10 pages and then Iwire deletes the whole mess of a thread.
__________________
Click to expand...

And I would drive most of y'all crazy by griping about your using a MWBC to wire them luminares up... :D
 
Last edited:
Just start using T-5 lamps and fixtures. There shorter. I have a retro fit kit that fits into a parabolic T8 housing, and turns it into a T-5 fixture. The T-5 sockets and housing fit inside the fixture without even taking the T8 sockets out.
 
iwire said:
Sorry it may be a 'bulb' shape but I bet it is a 'lamp'. :grin:
Click to expand...


You say tomato, I say tamata, yada yada... :)

Like in legitimate (stage) theater, it all depends on who you ask..
 
Status
Not open for further replies.
Top