Receptacle under panel

[GeorgeKoehl]

I was looking through the code and the forum and couldn't find where code specifically requires a 120 volt receptacle under a panel.

Around here the AHJ require it but I would like to know if it is required by code.

 

[jxofaltrds]

Is he using 210.52(G)?

 

[ceb58]

Is he using 210.52(G)?

I do not see where it would specify it be under a panel or it even requiring a panel in these locations

I was looking through the code and the forum and couldn't find where code specifically requires a 120 volt receptacle under a panel.

Around here the AHJ require it but I would like to know if it is required by code.

You need to politely ask for a code reference to this otherwise made up requirement.

 

[chevyx92]

I was looking through the code and the forum and couldn't find where code specifically requires a 120 volt receptacle under a panel.

Around here the AHJ require it but I would like to know if it is required by code.

Is this for temp power meter release? If so then I could see him wanting it.

 

[iwire]

Everyone has wants, what they don't have is requirement.

 

[infinity]

We usually install them at the panel to satisfy the section that Mike posted, 210.52(G), when the panel is located in the grage or basement. As Bob said this is not a requirement. We just put them there for simplicity.

 

[GeorgeKoehl]

Thanks for the help guys. I am glad to see that the reason I couldn't find it in the code was because it is not there