SE cable

[nickelec]

I never use Se cable here in NYC . Is this permitted this is out side on the load side of meter. Main service switch is located inside

Sent from my SM-S906U using Tapatalk

 

[infinity]

Yes it's permitted by the NEC. There are some limitations when installed in a raceway like fill (53%), above ground only, and 5X bend radius if installed in a conduit body.

 

[nickelec]

I'm assuming you also need an approved connector. And this isn't acceptable

Sent from my SM-S906U using Tapatalk

 

[infinity]

I'm assuming you also need an approved connector. And this isn't acceptable

I agree, hack work. And why a bonding bushing?

 

[nickelec]

Well you know you have to bond the Se jacket
Duhh

Sent from my SM-S906U using Tapatalk

 

[nickelec]

I agree, hack work. And why a bonding bushing?

Definitely hack work

Sent from my SM-S906U using Tapatalk

 

[AC\DC]

Same job the meter looks better than the panel

 

[JoeNorm]

Is it really above ground only?

 

[AC\DC]

Is it really above ground only?

Good point the line side of the meter coming from the bottom looks suspicious

 

[infinity]

Is it really above ground only?

Yes, SE cable cannot be in a buried raceway.

 

[AC\DC]

Never mind what I said,looked closer the load side is the SE