Securing MC cable to a concrete floor

[Ibarra]

Hello guys,

I would like to know what you use to secure MC cable (12/2 + G) to a concrete floor. We found a system based on clips but I would like to get any other options.

Thanks in andvance for your help.

Ricardo

 

[petersonra]

Hello guys,

I would like to know what you use to secure MC cable (12/2 + G) to a concrete floor. We found a system based on clips but I would like to get any other options.

Thanks in andvance for your help.

Ricardo

To a floor?

I would think whatever you would use to secure it to a wall or other flat surface would work as well on a floor.

 

[John120/240]

Sounds like a trip hazzard to me!! Is the MC cable subject to physical

damage? What are the circumstances where it will be used?

 

[Ibarra]

MC Cable will be installed under raised floors. Do you know any brand/vendor of securing hardware for this application?

Ricardo.

 

[John120/240]

3/8" one hole straps & Tek screws for starters

 

[ericsherman37]

3/8" one hole straps & Tek screws for starters

Sumpin' like dat!

 

[ed downey]

Tie Wrap the MC Cable to the Raised Floor Leg

 

[petersonra]

Tie Wrap the MC Cable to the Raised Floor Leg

A very cost effective solution.

 

[MIEngineer]

If this raised floor is in a data room which has an emergency power off (EPO) button securing the MC to the floor may not be necessary.

 

[scottp628]

if able keep off the concrete, came across new mc cable run along side old concrete wall. after 1.5 years moisture leached through wall onto the casing and completely ate away the aluminum in several places. we replaced the wire.

 

[weressl]

If this raised floor is in a data room which has an emergency power off (EPO) button securing the MC to the floor may not be necessary.

Basket tray if you have multiple cables.