twisted bare grounds

Status
Not open for further replies.
slick 50 said:
folded back then another slight twist to ensure good connectivity and then apply my red B cap..
Click to expand...
That's always rubbed me a little wrong, for some reason. I imagine the U-turn causing less contact pressure between the wirenut spring and the rest of the wires. I prefer using a separate piece as the pigtail.
 
LarryFine said:
First of all, welcome to the zoo! :smile:

Congratulations! You are the first person to have ever asked and answered their own question in their first post. :D
Click to expand...

And a pretty good trick with a post count of 2, but only one post........
heehaw.gif


posts.jpg
 
The post count is 2 because I relocated the other post and sent a PM advising that the first few posts have to be approved by a moderator before they appear in the forum.
 
LarryFine said:
That's always rubbed me a little wrong, for some reason. I imagine the U-turn causing less contact pressure between the wirenut spring and the rest of the wires. I prefer using a separate piece as the pigtail.
Click to expand...

You'd be suprised after you did a few. The bent over conductor meshes nicely when sqeezed in place with linemans
 
Status
Not open for further replies.
Top