gaelectric
Senior Member
- Location
- Highlands Ranch, CO
I have a storage tank/heater for geo thermal system that has a 6KW element for backup on the heating system in case it gets really cold. Or so it was explained to me by the geo thermal installer.
My question is if this unit can be connected with a 30 amp 240 volt circuit. There is no actual nameplate on the unit just an element with the 6KW rating.
This also is on a backup generator so the element would probably run any time the power was out as the compressors don't.
My question is if this unit can be connected with a 30 amp 240 volt circuit. There is no actual nameplate on the unit just an element with the 6KW rating.
This also is on a backup generator so the element would probably run any time the power was out as the compressors don't.