A GRC feeding a panel gets uncovered while doing a bath remodel (conduit was ran across the toilet) and said conduit is basically gone for about the 6" across the toilet drain. Obviously the owner does not want to pay for a new conduit and wires. Pulling the wires out and pulling new wires in is OUT OF THE QUESTION(I'm talking 1-1/4" conduit with 3-#3 of THOSE OLD THHW that makes a #3/0 look small),
So if I fix the pipe with a PVC kit, put a ground clamp on both sides and run a bond?
Kosher? or NOT?
I know a lot will jump up and down, but I'm curious to the reasoning. Wires will be protected, grounding will be restored... And I know some will invoke SOME NEC article.
ONE THING THOUGH, please don't tell me how other areas of the conduit may be compromised as well. Not my QUESTION.
So if I fix the pipe with a PVC kit, put a ground clamp on both sides and run a bond?
Kosher? or NOT?
I know a lot will jump up and down, but I'm curious to the reasoning. Wires will be protected, grounding will be restored... And I know some will invoke SOME NEC article.
ONE THING THOUGH, please don't tell me how other areas of the conduit may be compromised as well. Not my QUESTION.
Last edited by a moderator: