my work

[Davis9]

i can do it faster with pvc than i can with emt. a nice sharp hacksaw blade or sawzall blade cuts it pretty well

Not if you factor in installing the Equipment ground wire and then do it again to remark it.:grin:

Tom

Looks good from my house though.:wink:

 

[electricalperson]

i used what i had at hand to get the job done. i had 2 inch male adapters and scrap piece of conduit and a roll of #6 in the truck

 

[LarryFine]

lets hear your opinion of the job larry

It looks perfectly okay to me. I am curious about the two blocks in the upper-right corner of the big enclosure.

 

[iaov]

not too many negative comments about my work. guess i done a good job :smile:

Looks pretty nice to me. This an awefully tough audiance you're playing to here!!:smile:

 

[Davis9]

It looks perfectly okay to me. I am curious about the two blocks in the upper-right corner of the big enclosure.

Look like Neutral and Equip Ground bus to me.

Tom

 

[electricalperson]

the top is the neutral and the one under is the equipment ground bar

sorry for the bad photos ill get better ones

 

[LarryFine]

the top is the neutral and the one under is the equipment ground bar

So the main is elsewhere?

sorry for the bad photos ill get better ones

Just stand a bit closer, so what you want detailed fills the viewfinder.

 

[scrooge]

12 600s,AU.

12 600s,AU.

Are they going into the pictured panel? Looks like a tight fit, if the PVCs (2) hitting top left are the route.

 

[electricalperson]

Are they going into the pictured panel? Looks like a tight fit, if the PVCs (2) hitting top left are the route.

the panel is about 12 inches deep. theres 3, 4 inch pvc pipes. and larry the main breaker is in that panel. the EGC bar attaches inside the cabinet.

i terminated the service conductors today and pulled in the feeders. i will take pictures tommorw and post them for your enjoyment. i think the service conductors look pretty good i worked hard on it

 

[electricalperson]

So the main is elsewhere?

Just stand a bit closer, so what you want detailed fills the viewfinder.

the view finder is the screen of my cell phone. ill bring a digital camera tommorw if i can find it

 

[peter d]

Your work is horrible and you should be ashamed of yourself.

 

[electricalperson]

Your work is horrible and you should be ashamed of yourself.

thank you. everything i learned about hacking i learned in your how to be a hack 101 class

 

[electricalperson]

ok guys here it is. its pretty much all finished except i need 1 more breaker they sent a 100 amp instead of a 200 amp.

 

[electricalperson]

does anyone like it?:smile:

 

[peter d]

does anyone like it?:smile:

It looks good.

Are those used breakers in the panel by the way?

 

[electricalperson]

It looks good.

Are those used breakers in the panel by the way?

no those are the ones that came with the panel. they are brand new. i need to replace the lower left hand breaker its a 100 amp and i need a 200 amp

 

[LarryFine]

More coloring tape than I would have used, but it looks great! :smile:

 

[electricalperson]

thank you

 

[iaov]

Sweet!!!!!:smile:

 

[nunu161]

What kind of buss is that just wondering about the phase color alignment because in the i-line panels the phases flipover