ceb58
Senior Member
- Location
- Raeford, NC
I BET I know where those generators are.:bye:
Work Pics
- Thread starter DBoone
- Start date
- Status
I BET I know where those generators are.:bye:
mbrooke
Batteries Included
- Location
- United States
- Occupation
- Technician
So what did you do after lunch?:blink::lol:Some conduit work from a few months ago and a pic of my current project (new Marriot hotel in downtown Salt Lake City- just getting started)
.
Great job on that..
Nice work Jim.
Here are a few generators we installed awhile back.
The larger one in the top picture is a 4160 V 2250 KW, the others are 480 V 1000 KW's
The center is an existing 480 V 2000 KW that was relocated to be beside the new ones.
The bottom is two 480 V 1500 KW's about a 100 yards from the others.
Roger
Nice work Jennies and conduit.
Roger
I can't see them from my house
But, my guess would be a Medical complex.
Does the Larger one back the other three for a second back up?
Casino? Im think data center
They are at a casino. (got keep those bet's rolling :roll
Ronald, the large one (2250KW 4160 V) is solely for a chiller.
Roger
They are at a casino. (got keep those bet's rolling :roll
Ronald, the large one (2250KW 4160 V) is solely for a chiller.
Roger
:Wow" I never would have thought that place was that big, been there a couple times.
They have expanded somewhat.
Can't see them from my house but can see them from Google Earth.
Ronald
- Location
- New Jersey
- Occupation
- Journeyman Electrician
Here's a 400 amp feed through panel that I did from a few years ago:
jimdavis
Senior Member
- Location
- salt lake city, UT USA
Very nice work on the panels!
pjholguin
Senior Member
Nice work. Did the job specs call for RGS and hubs on the cabinets?
Here's a 400 amp feed through panel that I did from a few years ago:
Very Very nice setup. A few questions. Why the stainless and rigid? What is that corner angle raceway (never seen one of those)? I only see 2 phases coming in top of left panel and 3 phases leaving (maybe optical illusion)? Why are panels overlapping the wood backboard ?
That's some high quality work right there
That's some high quality work right there
Sierrasparky
Senior Member
- Location
- USA
- Occupation
- Electrician ,contractor
Are those SS cabinets?
- Location
- Placerville, CA, USA
- Occupation
- Retired PV System Designer
I see a suggestion of an incoming black to the left of the other two. Bad camera angle?
- Location
- New Jersey
- Occupation
- Journeyman Electrician
Thank you.
Yes those are stainless steel cabinets, I believe they were something like NEMA 6. The installation was in a commercial kitchen where they thought that there may be washing down from a hose hence the SS, the RMC and the hubs. The finished product had the conduits and the area between the panels boxed out and the entire area covered in tile that's why there's a combination of wonderboard and plywood. Overkill IMO but hey they paid for it.
The raceway connecting them together came from the manufacturer of the panels.
John120/240
Senior Member
- Location
- Olathe, Kansas
Sierrasparky
Senior Member
- Location
- USA
- Occupation
- Electrician ,contractor
Nice stuff:thumbsup:
- Status