Sierrasparky
Senior Member
- Location
- USA
- Occupation
- Electrician ,contractor
I was asked to look at this install to duplicate at another nearby site. It is a pump house for the Water district. The Exo serves a transfer switch and main panel inside. I noticed the nuetral wires were in a sperate conduit and run overhead.This seems quite odd. I also noticed no bushings bonding or insulating between the CT section and the Safety switch. I realize it's not energized yet but to remove the wires from the lugs to install bushins can be quite a task with 500's
IMG]http://i296.photobucket.com/albums/mm192/Sierrasparky/mainservice003.jpg[/IMG]
IMG]http://i296.photobucket.com/albums/mm192/Sierrasparky/mainservice003.jpg[/IMG]