mstrlucky74
Senior Member
- Location
- NJ
Have you ever seem this? It's not stepping the voltage up or down. I double checked the xfrmr schedule and panel schedules to see if there was a mistake and I don't think so according to the drawings. The xfrmr schedule reads as follows:
KVA= 75
PRIMARY AMPS= 90
SEC AMPS= 90
480V OVERCURRENT= 100A/3P
208V OVERCURRENT= 480V. 100A/3P
So it sure looks like the engineer knows its feeding 208/480 on both sides.
KVA= 75
PRIMARY AMPS= 90
SEC AMPS= 90
480V OVERCURRENT= 100A/3P
208V OVERCURRENT= 480V. 100A/3P
So it sure looks like the engineer knows its feeding 208/480 on both sides.